Tool Room & Training Centre (TRTC) at Wazirpur Industrial Area, Delhi and Hi-Tech Vocational Training Centre (HTVTC) at Okhla Industrial Area New Delhi were established, with technical and financial assistance of Government of Denmark and Government of Italy respectively, with the objective of contributing towards the development of industries in and around Delhi through supply of trained manpower, undertaking jobwork of machining and manufacturing of sophisticated tools. These centres were functioning as independent societies, registered under the societies registration act, 1860 each having separate Governing council and General body of the society.
The societies of TRTC and HTVTC have been amalgamated and renamed as Delhi Institute of Tool Engineering (DITE) . DITE has come into existence w.e.f. 28th Nov. 2007 and is functioning from Wazirpur Industrial area and Okhla Industrial area as Campus – I and Campus – II respectively.
DITE has been playing a vital role in the development of micro, small and medium industries through supply of trained manpower in the field of tool making and tool designing and supply of sophisticated tools such as dies, moulds, press tools, jigs, fixtures etc. for the past over thirty years. The Institute runs post- ITI courses in machine operations and die fitting, Diploma course in Tool & Die Making, Diploma course in Mechanical Engineering,B.Tech (Tool Engineering), B.Tech (Mechatronics) and M.Tech (Tool Engineering) to cater to ever challenging needs of technical excellence in the area of Tool Engineering and Mechatronics.
The trainees are given on the job training by well qualified faculty of the Institute. The Courses offered by Institute are approved by various agencies such as four year Diploma Course in Tool & Die Making by Board of Technical Education, Govt. Of NCT Delhi, B.Tech and M.Tech Course by AICTE and affiliated to GGSIP university. The Institute also conducts various short term courses in the field of Tool Engineering, operation & maintenance of CNC machines.
The institute is also manufacturing sophisticated tools for the reputed Industries viz. Maruti Udyog Ltd, L&T, Voltas, National Institute of Visually handicapped ( NIVH), Minda, Steel Strips India Ltd etc. It also provides consultancy service in the field of Tool Engineering to the SSI sector. DITE is perhaps the only Institute in the country where the degree level course in Tool Engineering is being conducted. Our endeavor is to make DITE as the centre of Excellence in Tool Engineering and Integrated Engineerings. The Trainees of the Institute are absorbed by the industries through campus interview during the final year of their training period.
Why Join Delhi Institute of Tool Engineering (DITE)
- Provides placement assistance with top recruiters
- Affiliated with Guru Gobind Singh Indraprastha University
- AICTE approved
- Research papers have been published in National/International journals by faculty and students
- Offers short term skill training courses
- MOU's with various industries to conduct trainings
- Faculty comprises of Ph.D holder
For more details about admission please contact :-
Phone Nos. 26388920, 29207304, 29207309,
Telefax:- 27377440
Fee Structure and Scholarships
Stream | Fees Structure |
---|
Courses Offered
Delhi Institute Of Tool Engineering , Delhi offers following courses in ENGINEERING AND TECHNOLOGY.
Course | Annual Fees | Tests Accepted | More Info |
---|---|---|---|
B.E.(MECHATRONICS) | More Info | ||
M.E.(TOOL ENGINEERING) | 75000 | More Info | |
B.E.(TOOL ENGINEERING) | 40000 | More Info | |
DIPLOMA(MECHANICAL ENGINEERING) | More Info | ||
DIPLOMA(TOOL AND DIE MAKING) | 24000 | More Info | |
MECHATRONICS Course
Course Name | Mechatronics |
Course Level | Under Graduate |
Intake | 60 |
Affiliated To | 12077 |
Specializations | |
Duration | 4 sYear |
Start Year | 2013 |
Accreditation | Not Eligible: Not Applied - No Accreditation |
Mode | Regular, Full Time, |
Annual Fee Structure | |
Tests Accepted | |
Scholarships |
|
TOOL ENGINEERING Course
Course Name | Tool Engineering |
Course Level | Post Graduate |
Intake | 18 |
Affiliated To | 12077 |
Specializations | |
Duration | 2 sYear |
Start Year | 2013 |
Accreditation | Not Eligible: Not Applied - No Accreditation |
Mode | Regular, Full Time, |
Annual Fee Structure | 75000 |
Tests Accepted | |
Scholarships |
|
TOOL ENGINEERING Course
Course Name | Tool Engineering |
Course Level | Under Graduate |
Intake | 60 |
Affiliated To | 12077 |
Specializations | |
Duration | 4 sYear |
Start Year | 2008 |
Accreditation | Eligible: Not Applied - No Accreditation |
Mode | Regular, Full Time, |
Annual Fee Structure | 40000 |
Tests Accepted | |
Scholarships |
|
MECHANICAL ENGINEERING Course
Course Name | Mechanical Engineering |
Course Level | Diploma |
Intake | 60 |
Affiliated To | Direcorate Of Training & Technical Education , New Delhi |
Specializations | |
Duration | 3 sYear |
Start Year | 2014 |
Accreditation | Not Eligible: Not Applied - No Accreditation |
Mode | Regular, Full Time, |
Annual Fee Structure | |
Tests Accepted | |
Scholarships |
|
TOOL AND DIE MAKING Course
Course Name | Tool And Die Making |
Course Level | Diploma |
Intake | 60 |
Affiliated To | Directorate Of Training And Technical Education, New Delhi |
Specializations | |
Duration | 4 sYear |
Start Year | 1978 |
Accreditation | ACCREDITED - No Accreditation |
Mode | Regular, Full Time, |
Annual Fee Structure | 24000 |
Tests Accepted | |
Scholarships |
|
Contact Number and Address
Address | Wazirpur Industrial Area, Wazirpur, Delhi, 110052, India |
---|---|
City | Delhi |
District | Delhi |
State | Delhi |
Pin code | 110052 |
Phone | +91 11 2700 6130 |
Fax | 26388920 |
Website | http://www.dite.delhigovt.nic.in/ |
Email Id | dpdite@gmail.com |
Faculty
Faculty by Course Level
Total Faculty for Under Graduate Courses | 12 |
Total Faculty for Post Graduate Courses | 4 |
Total Faculty for Diploma Courses | 17 |
Faculty by Designation
ASSOCIATE/ASSISTANT PROFESSOR | 11 |
OTHER | 22 |
Faculty by Appointment Type
REGULAR | 32 |
VISITING | 1 |
Faculty by Teaching Experience in this institute
MORE THAN 10 YEARS | 33 |
Faculty by Specialization
Teaching Staff
Teaching Staff by Department
Department | Sactioned Strength | In Position | PhD |
---|
Teaching Staff by Designation
Student Count
Number of Students by Course
MECHANICAL ENGINEERING | - |
TOOL AND DIE MAKING | 69 |
TOOL ENGINEERING | 71 |
MECHATRONICS | - |
Number of Students by Course Level
DIPLOMA | 69 |
POST GRADUATE | - |
UNDER GRADUATE | 71 |
Labs
Lab Name | Program | Course | Course Level | Major Equipment |
---|---|---|---|---|
ELECTRONICS LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Function Generator, Class A B C Amplifier, Digital Logic Gate, Flip Flop, Professor Bench, Diode Rec |
AUTOMATION LAB(HYDRAULIC & PNEUMATICS) | Engineering And Technology | Tool Engineering | Under Graduate | 3 Set Of Hydraulic And Pneumatic Trainer Kits, Transparent Model, Video Cassettess |
CAMPUS-1 CAD/CAM LAB | Engineering And Technology | Tool Engineering | Diploma | Pc - Iv, Pro-E, Auto Cad |
CAMPUS-1 COMPUTER LAB | Engineering And Technology | Tool Engineering | Diploma | P-Iv, C,C++, Ms-Office |
CAMPUS-1 HEAT TREATMENT | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-1 JIG GRINDING LAB | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-1 MAJOR PROJECT LAB | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-1 MATERLOGY LAB | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-1 MINOR PROJECT LAB | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-I CAM LAB | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-I CUTTING JIG & FIXTURES LAB | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-II INDUTRIAL ELECTRONICS | Engineering And Technology | Tool Engineering | Diploma | Ac - Dc Driver Kits, Training Kits |
CAMPUS-I MILLING PROCESS | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-I NON CONVENTIONAL & MANUFACTURING LAB | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-I PRESS TOOL & MOULD LAB | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-I PRODUCTION LAB-I | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-I TRUNING LAB | Engineering And Technology | Tool Engineering | Diploma | N/A |
CAMPUS-II MICRO PROCESSOR LAB | Engineering And Technology | Tool Engineering | Diploma | Micro Processor Kit |
CHEMISTRY(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Digital Ph Meter, Digital Conductivity Meter, Digital Spectrometer |
CNC LAB (CAMPUS-II) | Engineering And Technology | Tool Engineering | Diploma | Cnc Trainer |
CNC LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Horizontal Cnc Machining Centre, Cnc Copy Milling Machine, Cnc Turning Machine |
COMPUTER LAB - CAD/CAM LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Pro-E, Katia, Auto Cad |
ELECTRICAL(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Educational Kits Forthevnine Theorem, Nortams Theorem, Super Position Theorem, Reciprocating Theorem |
ENGG MECHANICS LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Wheel And Axle, Jib Crane Compression Balance,Bell Crank Lever,Parallal Force Appartus, Worm & Worm |
FLIUD MECHANICS LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Bernoulis Testing Equipment, Orifice Meter, Venturimeter Testing Equipmennt |
EMBEDDED SYSTEM LAB | Engineering And Technology | Tool Engineering | Post Graduate | Embedded System Kits |
KOM & DOM LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Cylinderical Cam/End Cam With Translating Follower, Tangent Cam, Translating Cam, Rotating Arrangeme |
MECHATRONICS LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Symenc Plc, Sensers |
METROLOGY LAB(CAMPUS - I) | Engineering And Technology | Tool Engineering | Post Graduate | Tool Maker Microscope, Profile Projector, Wolper Hardness Tester, Surface Plate, Sine Table, Slip Ga |
METROLOGY LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Utm, Impact Test, Hardness Test Equipment,Torsion Testing Machine, Ultrasound,Optical Profile Projec |
PHYSICS LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | Spectrometer, Laser, Hall-Effect, Carry Fostre Bridge, Fibre Optics Setup, Polarimeter, Cro, Crt |
REVERSE ENGINEERING LAB(CAMPUS - II) | Engineering And Technology | Tool Engineering | Under Graduate | 3D Coordinate Measuring Machine,Cnc Copy Milling Machine |
TOOL MANUFACTURING LAB(CAMPUS - I) | Engineering And Technology | Tool Engineering | Post Graduate | Jig Grinder Machine, Wire Cut Machine, Edm Machine |
Library
Number of seats | 125 |
Number of e-Journals | 450000 |
Is internet available? | - |
Are there computers in library? | Y |